Wheel Hub Bolt Size
Moderators: notoptoy, S Allen, Solex68
- Gornal
- Roadster Nut
- Posts: 74
- Joined: Mon Sep 10, 2018 3:51 pm
Wheel Hub Bolt Size
Hi all,
I have been searching the forum but can't seem to find the specifics on wheel hub bolts. I am trying to find the specs and would like to know if I can get one from my local auto zone or similar? I have a '66 Roadster with front disc brakes if that helps and need to replace the front hub bolt for the wheel.
thanks in advance
Dave
I have been searching the forum but can't seem to find the specifics on wheel hub bolts. I am trying to find the specs and would like to know if I can get one from my local auto zone or similar? I have a '66 Roadster with front disc brakes if that helps and need to replace the front hub bolt for the wheel.
thanks in advance
Dave
- fj20spl311
- Roadsteraholic
- Posts: 5009
- Joined: Mon Nov 28, 2005 3:54 pm
- Location: San Diego, Ca
Re: Wheel Hub Bolt Size
Yes, you can get them from the local auto parts store.
If you are after the lug nut, its 7/16 x 20.
If you are looking for the stud, you can make the studs for a Corvair work.
If you are after the lug nut, its 7/16 x 20.
If you are looking for the stud, you can make the studs for a Corvair work.
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
-
- Roadster Nut
- Posts: 37
- Joined: Mon May 14, 2018 4:30 pm
- Location: Portland, Oregon
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Wheel Hub Bolt Size
Any specific year Corvair?.....Driving my 67.5 1600 home from work yesterday just enjoying the beautiful weather I hear a Ping!. I was in the fast lane of Hwy 26 going g about 65 mph so I got off the next exit. I discovered my rear drivers side wheel was hanging on by two lugs which were also backing off. One stud was sheared off.
I had to rob a lug off another wheel to get home. All in all it could of been worse.
Shaun
PDX
I had to rob a lug off another wheel to get home. All in all it could of been worse.
Shaun
PDX
- Gregs672000
- Roadster Fanatic-Site Supporter
- Posts: 8983
- Joined: Fri Aug 07, 2009 11:47 pm
- Location: Tacoma, WA
Re: Wheel Hub Bolt Size
What wheels are you running? If they're 280 ZX wheels you will need specific lug nuts. I would check ALL your lugs asap! I've seen lug nuts with the wrong pitch appear to tighten only to fly off later. Scary stuff man, be careful. Get this right.
Greg Burrows
'67 2000 #588
Tacoma, WA
'67 2000 #588
Tacoma, WA
-
- Roadster Nut
- Posts: 37
- Joined: Mon May 14, 2018 4:30 pm
- Location: Portland, Oregon
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Wheel Hub Bolt Size
Libres, repops/ US trans am. The lugs are shanked.
When I took off the wheel today the stud I thought snapped off actually backed off and was in the brake drum. I replaced all those studs as they weren't knurled and seated well.
I definitely got lucky and can't even imagine that wheel flying off on the freeway. I appreciate your concern and feel like dodged a bullet.
Shaun
When I took off the wheel today the stud I thought snapped off actually backed off and was in the brake drum. I replaced all those studs as they weren't knurled and seated well.
I definitely got lucky and can't even imagine that wheel flying off on the freeway. I appreciate your concern and feel like dodged a bullet.
Shaun
- Gornal
- Roadster Nut
- Posts: 74
- Joined: Mon Sep 10, 2018 3:51 pm
Re: Wheel Hub Bolt Size
What size and where did you get them.from?
Thanks
Thanks
-
- Roadster Nut
- Posts: 37
- Joined: Mon May 14, 2018 4:30 pm
- Location: Portland, Oregon
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Wheel Hub Bolt Size
I'll check the box when I get home. I bought them from Oreillys. Under 2$ each.
Shaun
Shaun
- Gornal
- Roadster Nut
- Posts: 74
- Joined: Mon Sep 10, 2018 3:51 pm
Re: Wheel Hub Bolt Size
Awesome thanks. Just went to O'Reilly's and they said they didn't stock them at all, but if you had the specific part number that would be great.
-
- Roadster Nut
- Posts: 37
- Joined: Mon May 14, 2018 4:30 pm
- Location: Portland, Oregon
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Wheel Hub Bolt Size
Dorman , wheel studs part # 610-186
7/16" by 20. My car is a 67 but I don't think they changed on your 69 .......however I don't know that for a fact.
Shaun
7/16" by 20. My car is a 67 but I don't think they changed on your 69 .......however I don't know that for a fact.
Shaun
-
- Roadster Nut
- Posts: 37
- Joined: Mon May 14, 2018 4:30 pm
- Location: Portland, Oregon
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Wheel Hub Bolt Size
Shaundeegan wrote: ↑Fri Apr 26, 2019 8:06 pm Dorman , wheel studs part # 610-186
7/16" by 20. My car is a 67 but I don't think they changed on your 66......however I don't know that for a fact.
Shaun