hey . top of the morning to you..
I've taken the carbs off the intake for the first time and I'm wondering what should I look for as far as something off or wrong .. I've taken some pictures and hopefully they're good enough for someone to look close and see if anything is missing anywhere or something ... also what to be mindful of or whatever I need to know about the two.. there's quite a few holes so I'm curious .. . pls and thanks
carbs off intake
Moderators: notoptoy, S Allen, Solex68
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
carbs off intake
You do not have the required permissions to view the files attached to this post.
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: carbs off intake
I'll take that as it's all good . got new gaskets and going back in ... they were loose leaking air so hopefully this will fix my idling issue
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
-
- Roadster Nut-Site Supporter
- Posts: 1731
- Joined: Fri Feb 13, 2015 8:08 pm
Re: carbs off intake
I would check to make sure that the gas hose under each one are still pliable.
located in Chester NH
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: carbs off intake
Advanced carb cleaning is taking the bolt out of the fuel lid and cleaning or replacing the screen. Also to remove the fuel valve to check the condition and wear. Lots of tiny parts and pins so don't lose anything.
Look at the online parts manual first in the Wiki, to get an overview.
Always cut a new bowl gasket to seal.
Fuel bowl hose is in threads and Wiki I believe.
Linda
Look at the online parts manual first in the Wiki, to get an overview.
Always cut a new bowl gasket to seal.
Fuel bowl hose is in threads and Wiki I believe.
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: carbs off intake
Check .
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .