clock

Lorna c · Post by **Lorna c** » Sat Jan 27, 2018 3:08 am

does this look normal and would it stop the works ?

Lorna c · Post by **Lorna c** » Sat Jan 27, 2018 3:09 am

here it is closer

nismou20 · Post by **nismou20** » Sat Jan 27, 2018 11:40 am

Does not look normal, looks like it popped out.

mraitch · Post by **mraitch** » Sat Jan 27, 2018 12:04 pm

whatever we are looking at doesn't look normal - typically one should hardly ever be able to see bare wires - but I thought you had tried the clock against a battery - if it didn't work then, doesn't make a lot of difference about the state of the wire.

Lorna c · Post by **Lorna c** » Sat Jan 27, 2018 2:44 pm

mraitch wrote: ↑Sat Jan 27, 2018 12:04 pm whatever we are looking at doesn't look normal - typically one should hardly ever be able to see bare wires - but I thought you had tried the clock against a battery - if it didn't work then, doesn't make a lot of difference about the state of the wire.

it showed polarity and would click on and off when tap to battery. but something's crooked too . a pin or something ... might be what's jamming up the works

Lorna c · Post by **Lorna c** » Sat Jan 27, 2018 2:46 pm

here this one ..

Lorna c · Post by **Lorna c** » Sat Jan 27, 2018 2:49 pm

dash coming off again .. haha glutton for punishment I guess . ugh . just not today !

nismou20 · Post by **nismou20** » Sat Jan 27, 2018 10:21 pm

Could go through the glove box by taking out the cardboard. Mine was so badly torn on left side that I went through there to access the clock. Your clock mechanism can be coaxed by turning the gears by hand by overcoming the motor. If it binds then your pivot points are not free. Definitely looks like it's ajar from your pic.

Lorna c · Post by **Lorna c** » Fri Mar 16, 2018 5:49 am

nismou20 wrote: ↑Sat Jan 27, 2018 10:21 pm Could go through the glove box by taking out the cardboard. Mine was so badly torn on left side that I went through there to access the clock. Your clock mechanism can be coaxed by turning the gears by hand by overcoming the motor. If it binds then your pivot points are not free. Definitely looks like it's ajar from your pic.

I'll try that . now I know why it's stopped , it's driving me crazy . thanks !

yusef · Post by **yusef** » Thu Jul 19, 2018 12:24 pm

Did this ever get resolved? Mine is having the exact same issue.

Lorna c · Post by **Lorna c** » Sat Jul 21, 2018 12:28 pm

yusef wrote: ↑Thu Jul 19, 2018 12:24 pm Did this ever get resolved? Mine is having the exact same issue.

I haven't taken it back out to fix it but I'm pretty positive that's the reason why it's not turning .. it's showing signs of everything else being okay with the multimeter and stuff.. take a picture of the insides of yours and I bet it'll jump out to you.. good luck . I will be getting to it soon now everything is going well in the motor though..

Lorna c · Post by **Lorna c** » Sun Aug 05, 2018 4:56 am

yusef wrote: ↑Thu Jul 19, 2018 12:24 pm Did this ever get resolved? Mine is having the exact same issue.

Did you find it and fix it ?

yusef · Post by **yusef** » Mon Aug 13, 2018 3:53 pm

I ended up buying another clock that wasn't working and soaking it in WD40, and now that one works.

Post by **2mAn** » Mon Aug 13, 2018 4:35 pm

yusef wrote: ↑Mon Aug 13, 2018 3:53 pm I ended up buying another clock that wasn't working and soaking it in WD40, and now that one works.

haha it wasnt Rocket Science to fix it huh?

yusef · Post by **yusef** » Tue Aug 14, 2018 12:37 pm

No rocket science involved for that one! Thanks for the hook up!

Datsun Roadster Forum-311s.org

clock

Re: clock

Re: clock

Re: clock

Re: clock

Re: clock

Re: clock

Re: clock

Re: clock

Re: clock

Re: clock

Re: clock

Re: clock

Re: clock

Re: clock

Re: clock