Happy Sunday all!
I am putting longer wheel studs in the front and need to disassemble the hub so I can get the old ones out and new ones in. So far I have the hubs off, the bearings out, and the bolts that appear to hold the discs to the hub assembly removed, but I cannot get the two piece to disconnect from each other.
Have I missed a connection? I see no reason why they are still attached to each other, besides 50 years of oxidation.
Any thoughts? This is on a 1966 1600
Front Wheel hub disassembly
Moderators: notoptoy, S Allen, Solex68
-
- Roadster Fanatic
- Posts: 85
- Joined: Fri Jun 19, 2015 3:37 pm
Front Wheel hub disassembly
1966 Datsun 1600 - currently in the works
1993 Nissan 300ZX Convertible - love to drive
2015 Ford Explorer - because the others only seat two...
1993 Nissan 300ZX Convertible - love to drive
2015 Ford Explorer - because the others only seat two...
- spl310
- Roadster Guru
- Posts: 13213
- Joined: Sun Dec 29, 2002 10:38 pm
- Location: In front of this keyboard... in Jacksonville, Florida!
Re: Front Wheel hub disassembly
A tight fit that has rusted
"Wow, a Roadster!" Stuart Little
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
- fj20spl311
- Roadsteraholic
- Posts: 5008
- Joined: Mon Nov 28, 2005 3:54 pm
- Location: San Diego, Ca
Re: Front Wheel hub disassembly
Use your favorite rust buster spray. I have had good luck putting it back on the spindle ad tapping with a dead blow hammer.
Its very easy to bend the seal area if you support the rotor and try to tap the hub out.
Its very easy to bend the seal area if you support the rotor and try to tap the hub out.
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
- theunz
- Roadster Nut-Site Supporter
- Posts: 2396
- Joined: Sat May 02, 2009 1:54 pm
- Location: Catoosa Ok.
- Model: 2000
- Year: High Windshield-68-70
Re: Front Wheel hub disassembly
Lots of spray, lots of patience, lots of banging. Hit them hard enough and they WILL break, ask me how I know . Mike
Mike M
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
-
- Roadster Fanatic
- Posts: 85
- Joined: Fri Jun 19, 2015 3:37 pm
Re: Front Wheel hub disassembly
You nailed it...took forever but finally got it apart and the work done. God, that suckedtheunz wrote:Lots of spray, lots of patience, lots of banging. Hit them hard enough and they WILL break, ask me how I know . Mike
1966 Datsun 1600 - currently in the works
1993 Nissan 300ZX Convertible - love to drive
2015 Ford Explorer - because the others only seat two...
1993 Nissan 300ZX Convertible - love to drive
2015 Ford Explorer - because the others only seat two...