steering gear box rebuild
Moderators: notoptoy, S Allen, Solex68
-
- Forum Newb
- Posts: 2
- Joined: Tue Nov 20, 2018 2:40 am
steering gear box rebuild
I have a 1968.5 2000. The steering box has slack and after adjusting it is hard to steer. I would like to rebuild the box. Has anyone ever rebuilt their box? If so where do you get parts and what problems will I run into.
- Nissanman
- Roadster Fanatic-Site Supporter
- Posts: 3348
- Joined: Mon Apr 16, 2007 8:07 pm
- Location: Adelaide, South Australia
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: steering gear box rebuild
I gave my steering box and idler to a local transmission guru and he reconditioned it all for me.
Some shafts were metal sprayed and bushes were honed to suit.
I recommend a specialist to do the work since they can match the parts up to give you an "as new" part
Some shafts were metal sprayed and bushes were honed to suit.
I recommend a specialist to do the work since they can match the parts up to give you an "as new" part
Nissanman, just trying to help.
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
-
- Roadster Fanatic
- Posts: 168
- Joined: Wed Aug 21, 2013 2:33 pm
Re: steering gear box rebuild
someone on here rebuilt theres using "Z" steering components
looked like a great solution
looked like a great solution
-
- Forum Newb
- Posts: 2
- Joined: Tue Nov 20, 2018 2:40 am
Re: steering gear box rebuild
Thank you Nissaman and Space for your input. I will look into your suggestions.
- Gregs672000
- Roadster Fanatic-Site Supporter
- Posts: 8923
- Joined: Fri Aug 07, 2009 11:47 pm
- Location: Tacoma, WA
Re: steering gear box rebuild
You may have over tightened the adjuster, causing binding. There's gonna be some slop based on design, with the later boxes being far better I hear, but requiring a complete system to work. Dean (datsunparts.com, vendor) has complete kits for both box and idler.
Greg Burrows
'67 2000 #588
Tacoma, WA
'67 2000 #588
Tacoma, WA
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: steering gear box rebuild
I'd like more info on the z build for the box. Got a link?
Linda
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.