while the engine is out

Post by **jarhead** » Tue Sep 18, 2018 1:45 pm

I'm getting my engine/transmission ready for re-install after some transmission and clutch work on my 66.

Anyone have suggestions on addressing other issues that can be done to the engine bay? I thought I read somewhere along the way about removing the triangle of metal to get better access to the starter? Anything else I should consider?

greydog · Post by **greydog** » Tue Sep 18, 2018 2:26 pm

General cleanup of course.
Steering gear is easier to get to if you need a rebuild.
Dan

spyder · Post by **spyder** » Wed Sep 19, 2018 2:06 am

What does your bay look like? I became self conscious after seeing all these excellent rebuild threads.
Fell victim to "as long as I am here"!

Where I started, ran great but...........

To here ..................

Close ........................

Finally...............

Post by **jarhead** » Wed Sep 19, 2018 5:24 am

oh boy, here we go. Another project.

dynaguy · Post by **dynaguy** » Wed Sep 19, 2018 7:29 am

Slippery Slope time!

Curtis · Post by **Curtis** » Wed Sep 19, 2018 9:58 am

WYAII While you're at it i-tis. Slippery slope indeed.

Here's what happened to me.

Datsun Roadster Forum-311s.org

while the engine is out

while the engine is out

Re: while the engine is out

Re: while the engine is out

Re: while the engine is out

Re: while the engine is out

Re: while the engine is out