Bob,
I would start by getting some P21S polishing soap and thoroughly cleaning these items
You start with a good scrub with the supplied sponge and then a couple of pass with 000 or 0000 steel wool (nothing harsher)
This should get you to a decent level and remove all surface pitting and rust
If you want to make them prettier then use the HF buffer and some metal polish , I do not recommend a polishing wheel on a regular grinder, they typically have too much speed and you can easily burn trough I you’re not experienced at polishing
P21S and some before and after shots cleaning with the product
DF862EB7-F0F2-4A1A-B6EA-BD955D7D2F2B.jpeg
DAFCC550-B9D3-40C1-B3C2-0105F4AAC9A0.jpeg
59E8C674-7E33-47B1-AA9C-FB0518026F74.jpeg
D73B9908-A550-47EE-A1B7-B8FE505B3409.jpeg
2F7AC7F4-5382-414F-91AC-634A1E73F556.jpeg
You do not have the required permissions to view the files attached to this post.