head gasket
Moderators: notoptoy, S Allen, Solex68
-
Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
head gasket
would you say this is from the gasket or my frankenheader ? if the gasket how do I fix without pulling all of it off or can I do it that way ?
You do not have the required permissions to view the files attached to this post.
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
-
FergO2k
- Roadster Fanatic-Site Supporter
- Posts: 1725
- Joined: Thu Apr 29, 2004 12:18 pm
- Location: SoCal
Re: head gasket
The LH pic just looks like the header weld is rusting.
The RH one looks to be a leak from gasket or header, and in either case it has to all come off.
Take some barbq tong and hold some toilet paper (unused) in the ends, while putting a cardboard deflector aft of the engine fan.
If the tissue paper blows from the exhaust coming out, you have a leak.
The RH one looks to be a leak from gasket or header, and in either case it has to all come off.
Take some barbq tong and hold some toilet paper (unused) in the ends, while putting a cardboard deflector aft of the engine fan.
If the tissue paper blows from the exhaust coming out, you have a leak.
Fergus O
69 2L, SUs (driver, not susceptible to polish)
02 Tacoma 4 door (sold at 300k miles!)
2017 Honda Ridgeline (2021 purchase)
Los Alamitos, CA
69 2L, SUs (driver, not susceptible to polish)
02 Tacoma 4 door (sold at 300k miles!)
2017 Honda Ridgeline (2021 purchase)
Los Alamitos, CA
-
Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: head gasket
well that's easy.enuf maybe . there's black soot there on the nuts holding the header on , on the middle two nuts . I have a new big box to use for this test thx
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .