Hard top install
Moderators: notoptoy, S Allen, Solex68
-
mellis18
- Site Supporter
- Posts: 500
- Joined: Sun Apr 28, 2013 6:07 pm
- Location: Saratoga Springs, UT
Hard top install
Does anyone out there have some pix of a hard top install? Wanting to know where and how the mounts under portholes on either side of top fit and how they are secured. Putting top on a 69 2L.
Robert Ellis
Saratoga Springs, UT
1969 SRL311
1969 SRL311-07332
Matching numbers
1966 Mustang Coupe
Saratoga Springs, UT
1969 SRL311
1969 SRL311-07332
Matching numbers
1966 Mustang Coupe
-
fj20spl311
- Roadsteraholic
- Posts: 5038
- Joined: Mon Nov 28, 2005 3:54 pm
- Location: San Diego, Ca
Re: Hard top install
Search "+hardtop +hold" for a picture.
Usually there is an L bracket that you install a eye bolt.
I use a not on both sides of the L bracket to limit the pressure on the seal. I also install a piece of rubber tube inside the eye to take up the extra space on the top pivot bolt.
Usually there is an L bracket that you install a eye bolt.
I use a not on both sides of the L bracket to limit the pressure on the seal. I also install a piece of rubber tube inside the eye to take up the extra space on the top pivot bolt.
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
-
Alvin
- Roadster Nut-Site Supporter
- Posts: 8381
- Joined: Tue Jan 23, 2007 7:01 pm
Re: Hard top install
not sure if the side mounts are different for the high windshield but here are a few early cars:
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread