What did you do TO or FOR your Datsun today?(Roadsters only)
Moderators: notoptoy, S Allen, Solex68
-
- Site Supporter
- Posts: 4161
- Joined: Fri Jan 01, 2010 2:49 pm
- Location: Des Moines, WA
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
I would but one of the local guys spoke up for them. Trading the wheels for work on my 5 speed. I have a set of unused 1971 Z steel wheels. Guy took them off the day after he bought the car. Still has the car.
I would like to be doing something for my roadster but the garage is only in the 50s at best. I have plating and chrome to get done since the car comes back from paint finally next month. I went looking and my wiring is mostly done. So I will finish that soon.`
I would like to be doing something for my roadster but the garage is only in the 50s at best. I have plating and chrome to get done since the car comes back from paint finally next month. I went looking and my wiring is mostly done. So I will finish that soon.`
66 stroker, almost done.
67 basket case, paint coming soon.
67 basket case, paint coming soon.
-
- Roadster Nut-Site Supporter
- Posts: 2441
- Joined: Sat May 02, 2009 1:54 pm
- Location: Catoosa Ok.
- Model: 2000
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
I hear you about the heat. Fortunately I have a large heater in mine and I can bring it up to 63* in 10 or 15 minutes, I find that to be about perfect for working. If I let it get to 65 or so I start to get hot. Unfortunately it is not air conditioned and Oklahoma summers are miserable. Probably the opposite of your weather issues. Sounds like you should be on the road by summer
Mike M
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
-
- Roadster Fanatic
- Posts: 97
- Joined: Sat Dec 26, 2020 7:21 pm
- Location: Smith Mt. Lake Virginia
- Model: 2000
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Unfortunately, I had to put down SRL311 04573 and send her off to the big car meet in the sky!
You do not have the required permissions to view the files attached to this post.
Life's too short, buy your best tool first!
69 2000 'Lil Red, pretty much done
66 1600 Stroker, Whitelady, in progress
69 2000 'Lil Red, pretty much done
66 1600 Stroker, Whitelady, in progress
-
- Site Supporter
- Posts: 204
- Joined: Wed Jan 15, 2014 1:48 pm
- Location: San Jose, CA
- Model: 1500/1600
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
RIP SRL31104573...
1970 1600 - SPL-31127516
San Jose, CA
San Jose, CA
-
- Roadster Fanatic-Site Supporter
- Posts: 3404
- Joined: Mon Apr 16, 2007 8:07 pm
- Location: Adelaide, South Australia
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Well, nothing is simple is it?
Today I pulled out a faulty fuel level sender from my '65 SP310: after nearly 60 years it has gone intermittent.
I had already purchased the '68 VW Beetle sender which reputedly is a direct bolt in replacement.
Well, first up the float arm on the new unit was far too long and had to be shortened to approximate the OEM arm.
Needed to reform the loop at the end of the wire to clamp onto the plastic float. So now the float arms approximate each other.
Even though the 5 mounting holes were the same pattern as the OEM sender, they were clocked slightly differently which meant I couldn't mount the thing without the float arm fouling on internal baffles
Bear in mind the 5 holes are not evenly spaced and have only ONE orientation that matches the fuel tank holes. You can see to get the same float arm orientation and to match the mounting holes, I had to redrill the 5 holes a few degrees further CCW.
The rubber seal has a notch cut in it for the FRONT of the car which, of course, is the only orientation which lines up with the holes in the tank.
So, now that tab "A" matches slot "B" matches the fuel tank,it was all go
Needed to re-terminate the sender wire with a spade connector, the ground wire eye terminal went under one of the mounting screws.
Barring any calibration adjustments we now have a reliable fuel gauge
Now, that wasn't so hard was it?
Today I pulled out a faulty fuel level sender from my '65 SP310: after nearly 60 years it has gone intermittent.
I had already purchased the '68 VW Beetle sender which reputedly is a direct bolt in replacement.
Well, first up the float arm on the new unit was far too long and had to be shortened to approximate the OEM arm.
Needed to reform the loop at the end of the wire to clamp onto the plastic float. So now the float arms approximate each other.
Even though the 5 mounting holes were the same pattern as the OEM sender, they were clocked slightly differently which meant I couldn't mount the thing without the float arm fouling on internal baffles
Bear in mind the 5 holes are not evenly spaced and have only ONE orientation that matches the fuel tank holes. You can see to get the same float arm orientation and to match the mounting holes, I had to redrill the 5 holes a few degrees further CCW.
The rubber seal has a notch cut in it for the FRONT of the car which, of course, is the only orientation which lines up with the holes in the tank.
So, now that tab "A" matches slot "B" matches the fuel tank,it was all go
Needed to re-terminate the sender wire with a spade connector, the ground wire eye terminal went under one of the mounting screws.
Barring any calibration adjustments we now have a reliable fuel gauge
Now, that wasn't so hard was it?
You do not have the required permissions to view the files attached to this post.
Nissanman, just trying to help.
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
-
- Site Supporter
- Posts: 4161
- Joined: Fri Jan 01, 2010 2:49 pm
- Location: Des Moines, WA
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Well that's what you get for having a 65. I detailed what I did for my 66. Which was shorten the arm, stick it on the diagonal and away I went. Mounting holes are identical for later car and it didn't hit the baffle. I guess the VW one doesn't care about positive ground, just whether it's up or down since it's just a resistor.
66 stroker, almost done.
67 basket case, paint coming soon.
67 basket case, paint coming soon.
-
- Roadster Fanatic-Site Supporter
- Posts: 3404
- Joined: Mon Apr 16, 2007 8:07 pm
- Location: Adelaide, South Australia
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
I have the sender feeding a neg ground later model gauge with a custom built 8VDC regulator. Worked OK for years until the sender suddenly developed dead spots on the potentiometer windings . Off the team now!
Nissanman, just trying to help.
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
-
- Site Supporter
- Posts: 4161
- Joined: Fri Jan 01, 2010 2:49 pm
- Location: Des Moines, WA
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Aren't you Mr. Clever.
66 stroker, almost done.
67 basket case, paint coming soon.
67 basket case, paint coming soon.
-
- Site Supporter
- Posts: 150
- Joined: Tue Apr 03, 2012 7:52 pm
- Location: Hood River, OR
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Nice work-around(s), write-up and photos. Hard for some of us civilians to keep up with the masters of 12v electronics, but the dialog is appreciated.
68' 2L solex- in progress
68' 2L SU- driver, 69' 2L next
68' 2L SU- driver, 69' 2L next
-
- Site Supporter
- Posts: 318
- Joined: Fri Jul 04, 2008 7:29 am
- Location: Uk
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Just purchased a used Nissan sport option oil cooler, pipes and engine block adapter.
You do not have the required permissions to view the files attached to this post.
1965 Nissan Silvia (CSP311) for total restoration
1978 260Z finally on the road (Rebello 3.2L)
1978 260Z finally on the road (Rebello 3.2L)
-
- Roadster Fanatic
- Posts: 233
- Joined: Sat Oct 28, 2023 5:27 am
- Location: Savannah, GA
- Model: 2000
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Cleaned the inside of the front fender "traps". Lots of dirt on both sides. Between both fenders and the under carriage I think I've dropped about 15 lbs of dirt, grease and grime
You do not have the required permissions to view the files attached to this post.
Greg McCarty
1969 SRL311 07324
1969 SRL311 07324
-
- Roadster Fanatic
- Posts: 396
- Joined: Mon Jan 01, 2007 6:19 pm
- Location: Maryland
- Model: 1500/1600
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Exactly where my Datsuns have rusted out in the past. For the sake of a plastic inner fender baffle, we could have be spared to rusted out fenders belly and rocker rot
-
- Roadster Fanatic
- Posts: 396
- Joined: Mon Jan 01, 2007 6:19 pm
- Location: Maryland
- Model: 1500/1600
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
It also gets trapped high upper up on the firewall cowling. There is an air passage that channels cooler air to the vents by your legs. The dirt gets stuck in there too. But you have to pull the fender off to get to it. . At least on my 69s and ‘70 cars
-
- Roadster Fanatic
- Posts: 233
- Joined: Sat Oct 28, 2023 5:27 am
- Location: Savannah, GA
- Model: 2000
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Could you use an air compressor to blow it from there inside out and save you from removing the fender?
When I cleaned mine out I used as screw driver to chisel and scrape big stuff, wire bush for some smaller stuff and an old paint brush to brush out cracks and then finish off with an air compressor ... it made a bit more of a mess but you could see where it blew dust/dirt out through some fender and door passages. Might be able to reverse that process and blow from the inside out?
When I cleaned mine out I used as screw driver to chisel and scrape big stuff, wire bush for some smaller stuff and an old paint brush to brush out cracks and then finish off with an air compressor ... it made a bit more of a mess but you could see where it blew dust/dirt out through some fender and door passages. Might be able to reverse that process and blow from the inside out?
Greg McCarty
1969 SRL311 07324
1969 SRL311 07324
-
- Site Supporter
- Posts: 4161
- Joined: Fri Jan 01, 2010 2:49 pm
- Location: Des Moines, WA
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
I was told by a Datsun/Nissan parts guy that I knew since the 70s that they came off the boat with rust.
66 stroker, almost done.
67 basket case, paint coming soon.
67 basket case, paint coming soon.