What did you do TO or FOR your Datsun today?(Roadsters only)

Pjackb · Post by **Pjackb** » Fri Mar 27, 2020 11:40 pm

nismou20 wrote: ↑Tue Mar 17, 2020 6:01 pm Went to town on Domes with the Mother of mag polishes

Trying the black chrome look for mine

F7EF22D8-03F5-4F74-9855-E0EF8136BCFC.jpeg

DC85E679-DB03-4287-8BBA-5D82B94EE38C.jpeg

6DE62C55-3E5F-42A8-BF01-03484D6CAE9F.jpeg

A905DC55-9A8E-4949-B2A2-CB1FBE3537E8.jpeg

dynaguy · Post by **dynaguy** » Sat Mar 28, 2020 9:33 am

Nice look!

nismou20 · Post by **nismou20** » Sat Mar 28, 2020 8:55 pm

Ok Pjack, you gotta share. Which paint kit did you go with? Is it 2 part with black base and clear? Looks quite nice. Iâ€™m also contemplating another bronze metallic for valve cover rather than polishing to a shine, itâ€™s too much work!

raylim · Post by **raylim** » Sun Mar 29, 2020 5:12 pm

Installed a USB port in place of the cigarette lighter. I had to open up the hole to make it fit bit itâ€™s pretty sleek looking as itâ€™s flushed with center console. Now to tackle some tunes for the car!

nismou20 · Post by **nismou20** » Sun Mar 29, 2020 6:34 pm

Great idea Ray!

zippy67roadster · Post by **zippy67roadster** » Sun Mar 29, 2020 11:14 pm

I just started to disassemble the engine bay on my 67 1600 project. It has an H20 instead of the R16 so I might just replace it with a U20 and 5 speed. I will start a build thread for it once I get the new shop finished so I don't have to move int in boxes!

zippy67roadster · Post by **zippy67roadster** » Sun Mar 29, 2020 11:15 pm

Pjackb wrote: ↑Fri Mar 27, 2020 11:40 pm
nismou20 wrote: ↑Tue Mar 17, 2020 6:01 pm Went to town on Domes with the Mother of mag polishes
Trying the black chrome look for mine

F7EF22D8-03F5-4F74-9855-E0EF8136BCFC.jpeg

DC85E679-DB03-4287-8BBA-5D82B94EE38C.jpeg

6DE62C55-3E5F-42A8-BF01-03484D6CAE9F.jpeg

A905DC55-9A8E-4949-B2A2-CB1FBE3537E8.jpeg

Is it powder coating or actually black chrome?

Pjackb · Post by **Pjackb** » Mon Mar 30, 2020 7:50 am

nismou20 wrote: ↑Sat Mar 28, 2020 8:55 pm Ok Pjack, you gotta share. Which paint kit did you go with? Is it 2 part with black base and clear? Looks quite nice. Iâ€™m also contemplating another bronze metallic for valve cover rather than polishing to a shine, itâ€™s too much work!

zippy67roadster wrote: ↑Sun Mar 29, 2020 11:15 pm Is it powder coating or actually black chrome?

The paint is called Duplicolor Metalcast , check the link below I did a write up about it here to answer your questions

https://www.duplicolor.com/product/meta ... ive-paint/

viewtopic.php?f=20&t=33207

devo · Post by **devo** » Tue Mar 31, 2020 4:20 pm

I put on a new Header from Datsunparts, and new dogbones for the SU's. Then tuned the SU's. Car runs like a top and is ready for summer!

68DSU · Post by **68DSU** » Tue Mar 31, 2020 5:40 pm

I had the hood off and was going to get a couple of neighborhood kids to help me put it back on when the world shut down. I was afraid of losing the precious hood pins so I drafted the bride to help me out. I think she was so bored from being inside that anything was preferable.
Hood on and still married.

Gregs672000 · Post by **Gregs672000** » Thu Apr 02, 2020 11:48 pm

Yesterday I did the most disliked maintenance on the car... lubing the chassis. Hate those damn grease fittings. Always end up with blobs of grease here and there when the two disconnect or are difficult. Laying on the ground doesn't help. I may need to get a new grease gunt that's smaller and more flexible.

Post by **CSP311** » Fri Apr 03, 2020 9:17 am

Spent more money on Yahoo Japan for the csp...ouch

Oddworx · Post by **Oddworx** » Sun Apr 05, 2020 2:11 am

I threw on this little decal. Loving it.

bobd · Post by **bobd** » Sun Apr 05, 2020 5:40 am

Gregs672000 wrote: ↑Thu Apr 02, 2020 11:48 pm Yesterday I did the most disliked maintenance on the car... lubing the chassis. Hate those damn grease fittings. Always end up with blobs of grease here and there when the two disconnect or are difficult. Laying on the ground doesn't help. I may need to get a new grease gunt that's smaller and more flexible.

Get this - https://www.amazon.com/gp/product/B00H7 ... UTF8&psc=1 and a flexible hose. You'll be glad you did.

dynaguy · Post by **dynaguy** » Sun Apr 05, 2020 8:57 am

bobd wrote: ↑Sun Apr 05, 2020 5:40 am
Gregs672000 wrote: ↑Thu Apr 02, 2020 11:48 pm Yesterday I did the most disliked maintenance on the car... lubing the chassis. Hate those damn grease fittings. Always end up with blobs of grease here and there when the two disconnect or are difficult. Laying on the ground doesn't help. I may need to get a new grease gunt that's smaller and more flexible.
Get this - https://www.amazon.com/gp/product/B00H7 ... UTF8&psc=1 and a flexible hose. You'll be glad you did.

Yep, what he said...Had one for a couple of years....works great. I bought cheaper knock-off version on eBay. Works fine. FWIW Pat

Datsun Roadster Forum-311s.org

What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)

Re: What did you do TO or FOR your Datsun today?(Roadsters only)