PNW chrome shops

unklpat · Post by **unklpat** » Tue Oct 22, 2019 1:55 pm

My rear over-riders need help, any local suggestions? Thx Pat

SLOroadster · Post by **SLOroadster** » Tue Oct 22, 2019 2:15 pm

Depends on where you are. Victoria Chrome in Victoria BC has a pretty good reputation, and will be somewhat cheaper since there will be the exchange rate to consider. I'll be sending all my chrome for my '59 Alfa project up there at some point.

Will

unklpat · Post by **unklpat** » Tue Oct 22, 2019 2:21 pm

Sorry, Seattle area. Thx Pat

Curtis · Post by **Curtis** » Tue Oct 22, 2019 6:27 pm

Not cheap but high quality, Show Quality in SeaTac.

They did my hub caps and currently have my vent window frames.

Post by **Solex68** » Tue Oct 22, 2019 9:10 pm

I have a set of 4 in mint condition $499.

theunz · Post by **theunz** » Wed Oct 23, 2019 9:00 am

Over riders would be cheap to ship. Depending if you're after show quality or driver quality, you could ship to a distant location and save some money. I had my bumpers done about 5 years ago at a small local shop and they came out fine. The shop had an employee who did show car bumpers on the side for more than twice the price at his own bumper shop. Funny thing was, I went to the bumper shop first and he told me that unless I was needing perfect show quality I would be much better off going to Charlie's Chrome where he worked during the daytime. He said that he would be doing the bumper there anyway. I guess just not with the same amount of detail. He took a couple of dents out as well and they look like new to me. By the way, neither place was doing the triple chrome process which adds a layer of copper and also adds considerabley to the price.
Almost forgot Charlie's wanted $60 each to do the over riders. I opted not to do them, as I like the cleaner look without them.

unklpat · Post by **unklpat** » Wed Oct 23, 2019 1:37 pm

FYI, I have a quote from victoriaplating.ca

Bumper $450.00 cdn

Overiders $90 each cdn

Shipping ??? we can ship at your cost

Hope that helps

Regards

Jared

Curtis · Post by **Curtis** » Wed Oct 23, 2019 1:49 pm

Have you considered the stainless bumpers and overiders?

unklpat · Post by **unklpat** » Wed Oct 23, 2019 6:20 pm

Just drove to Mt. Vernon, nice crisp weather. Specialty metal finishing quote, $125 ea. FYI

Curtis · Post by **Curtis** » Wed Oct 23, 2019 6:43 pm

That's why I'm going with stainless. For $1000 you get 2 bumpers, 4 overriders and no rust.

unklpat · Post by **unklpat** » Thu Oct 24, 2019 10:38 am

Bumpers are new, no front over riders, hence My quest. Pat

Curtis · Post by **Curtis** » Thu Oct 24, 2019 10:47 am

unklpat wrote: ↑Thu Oct 24, 2019 10:38 am Bumpers are new, no front over riders, hence My quest. Pat

If I had some decent ones I'd let you have them since I'm switching. Ted Heaton had about 40 of them, contact him and see if he still has some.

Datsun Roadster Forum-311s.org

PNW chrome shops

PNW chrome shops

Re: PNW chrome shops

Re: PNW chrome shops

Re: PNW chrome shops

Re: PNW chrome shops

Re: PNW chrome shops

Re: PNW chrome shops

Re: PNW chrome shops

Re: PNW chrome shops

Re: PNW chrome shops

Re: PNW chrome shops

Re: PNW chrome shops