What parts to save before going to crusher

fj20spl311 · Post by **fj20spl311** » Tue Feb 05, 2019 7:14 pm

I could come up in a couple of weeks,
Right now I am in the last few weeks of First Robotic Competition as a mentor.....I highly suggest you check your local high school for a team and volunteer/support.

Post by **notoptoy** » Tue Feb 05, 2019 10:54 pm

My Nephew is in this competition out of Farragut High School in Knoxville, TN! I support their team through work (and my brother!). Great program with a pretty unbelievable budget, all self raised.

fj20spl311 · Post by **fj20spl311** » Tue Feb 05, 2019 11:41 pm

Its a blast to pass on the little mechanical have gained.

Lorna c · Post by **Lorna c** » Thu Feb 07, 2019 7:54 pm

that's cool . I've like watching those things sometimes .. I get my fill after a few but I like to catch up on the designs once and a while .

raylim · Post by **raylim** » Sun Feb 10, 2019 1:29 pm

Got some parts off of the 69. We've made good progress. There's still some parts left but I'm waiting for it to dry up a bit here in So.Cal before I pull the engine and trans out. This is my first 2L is this a fan clutch? The fan attached to the inner part that rotates on a sealed bearing.

greydog · Post by **greydog** » Sun Feb 10, 2019 2:26 pm

Yes, that's the fan clutch. Be sure to keep moth master cylinders and the hood latch.
Dan

raylim · Post by **raylim** » Mon Feb 18, 2019 2:29 pm

Called CAlifornia DMV and this vin is out of the system.
I did a vin verification and they came to me to get my 67 vin and title resurrected for about $250.

theunz · Post by **theunz** » Mon Feb 18, 2019 5:00 pm

The fan clutch is missing the band that goes around the circumference and hooks into the rectangular notch in the X thingy.

onsight512 · Post by **onsight512** » Wed Feb 20, 2019 7:49 pm

How *is* that driver's side front fender? I need to repair/replace mine at some point. I believe the PO had the front left wheel come off while he was driving.

[url=https://flic.kr/p/Mo3PDi]

raylim · Post by **raylim** » Wed Feb 20, 2019 10:01 pm

onsight512 wrote: ↑Wed Feb 20, 2019 7:49 pm How *is* that driver's side front fender? I need to repair/replace mine at some point. I believe the PO had the front left wheel come off while he was driving.

[url=https://flic.kr/p/Mo3PDi]

Itâ€™s a bit rough but that depends who you're asking. Feel free to stop by and check it out. This Sunday morning is Carcadia â€œcars and coffeeâ€ in ARCADIA, CA from 7-9 am.
Ray

Lorna c · Post by **Lorna c** » Thu Feb 21, 2019 2:36 pm

Hey , your datsun letters on the front , how are they ? I need some original ones ..

onsight512 · Post by **onsight512** » Thu Feb 21, 2019 3:28 pm

Lorna c wrote: ↑Thu Feb 21, 2019 2:36 pm Hey , your datsun letters on the front , how are they ? I need some original ones ..

Mine? They're in pretty good shape.

Lorna c · Post by **Lorna c** » Thu Feb 21, 2019 7:46 pm

onsight512 wrote: ↑Thu Feb 21, 2019 3:28 pm
Lorna c wrote: ↑Thu Feb 21, 2019 2:36 pm Hey , your datsun letters on the front , how are they ? I need some original ones ..
Mine? They're in pretty good shape.

Oops wrong person

Datsun Roadster Forum-311s.org

What parts to save before going to crusher

Re: What parts to save before going to crusher

Re: What parts to save before going to crusher

Re: What parts to save before going to crusher

Re: What parts to save before going to crusher

Re: What parts to save before going to crusher

Re: What parts to save before going to crusher

Anyone interested in the SRL-07188 frame

Re: What parts to save before going to crusher

Re: What parts to save before going to crusher

Re: What parts to save before going to crusher

Re: What parts to save before going to crusher

Re: What parts to save before going to crusher

Re: What parts to save before going to crusher