Datsun Roadster Forum-311s.org

I know at some point NISMO changed the jack location from the drivers side wheel well to the rear bulkhead. Also, the spud for the spare tire hold...

Hi all, been working on this project for a little while. Hope you enjoy the result.

So, 2 weeks ago I had the engine running pretty good, went to start it and the rear carb started puking out the over flow, followed by the front carb...

Head off to a show I've never been to today, Cool Cars Saratoga Car Show . Truly wasn't expecting much.... but wow, something like 400 cars in...

Looking at buying a Roll Bar for my 1969 1600. Any suggestions of where to look? Dennis

According to my registration, I have a 69...a few noobie questions..
*1...are side trim pcs L & R side specific?
*2...where is best place to find...

Does anyone have enough of a right rear 68 quarter to help me fix this?

Some may have seen this and I hope I copied the link correctly.

Has anyone had new door glass made, and if so, did the company keep the template to make more?

thanks

Still trying to get a key made and need to verify

is the 68 a 2 key or 1 key system

At Shasta, Mike Young told tale of original equipment fuses with messages printed in red inside. Here's one that reads Life. He said others say Peace...

I need to know the measurement from the intake/exhaust mounting surface on the head of a 1600 to the inner fender, as well as the length of the...

What are your opinions on having a hard top, pro's and con's.

My car came with a hard top but no soft top.

I really don't see myself using the...

Getting ready to pull my 1600/4speed for some transmission and clutch work. Looking to pick an inexpensive hoist at harbor freight. Will a one ton...

So, after getting it running, first thing I noticed is that the fuel and temp gauges aren't working, I've read a lot here on the IVR, but a lot of...

I'm talking about the interior trim piece(s) that mounts to the back of the windshield frame, up at the top. It is held in place apparently by the...

My old pump had the outlet at about 2 o'clock, the new one has it at 11 o'clock. How am I supposed to account for this? I removed the screws from the...

I’m finally getting my stock wheels powder coated. From what I can see the stock color is the silver used on all years. I just want to confirm.

Got an email from a guy looking for roadster restoration specialist on the East Coast. Recommendations any one?

Steve

I have a new soft top and a new boot cover to install the snaps on to. I got this hardware with each and I have no idea how these are put together...

So, after spending all winter and spring replacing the transmission and cleaning up the engine, I have my car on the road. Had a nice drive today....

I have mine but it is barely legible, I was wondering if someone does a reproduction on these or has any ideas on how to restore the one I have....

Had a brake leak and this is what the cylinder looks like. Rebuild for $38 or replace for $140?

Check out what I found on Facebook Marketplace.

I now and again look at the Japanese SP/SR owners blog, nice looking ones at a recent meet (at the top of the page), but I am drawing your attention...

I have been getting braver and braver driving my car, getting all the bugs fixed as they come up. I have a new one I noticed the other day, my temp...

Does anyone know where I can get the sun visor rods for a 1968 1600?

Here's an oldie but goodie enjoy!

Sorry for the re-post to this introductory post but I thought I would try getting the request into a higher-traffic subforum.

I've searched the site...

I recently completed a top side restoration of my roadster, including new carpets. I put the snaps in, with the spike ring on top of the carpet and...

So after posting this, they are legit! Great news.

Nice graphics, selection etc. Contact number is all over the internet for a variety of sites,...

So, I have owned my 67 (L18) for 15 years or so. Several years ago, it was my daily driver, and life was good. Well, had an issue with the fuel line...

So I'm just getting used to my 2000 roadster but I have to say I find the shifter for the 5-speed transmission very peculiar. Regardless of what gear...

Pulled from Today's Hemmings Blog:

THIS DAY IN AUTOMOTIVE HISTORY
6/26/1958:
First Datsuns (Nissan) exported to U.S.

Does anyone want a free hardtop for a 1968 + 2000 / 1600?
I finally had my car delivered to my home from our race shop and it came with a fiberglass...